ph - 사용자 기여 [ko]

Linux

2011-12-01T02:01:06Z

111.91.137.50:

==== 한글 나오게 하기 ====

<code>.bashrc</code>에 <code>export LANG=ko_KR.UTF-8</code>

X에 한글글꼴이 없을 수 있음. 그러면 윈도우에 글꼴 몇개 가져다가<code>/usr/share/fonts/ms/</code>에 넣고 <source lang='bash'># cd /usr/share/fonts/ms
# mkfontscale
# ttmkfdir
# fc-cache
# chmod -R a+r /usr/share/fonts/msfont</source> 이렇게 하면 됨. 글꼴파일 이름이 한글이어도 정상동작했고 firefox에서 자동으로 인식했음. 터미널에는 글꼴 없어도 export LANG만 가지고도 됨.[http://blog.nice2seeyou.com/mike/tag/%ED%95%9C%EA%B8%80%ED%8F%B0%ED%8A%B8 여기]참고했음. 나는 fonts.dir, fonts.cache-1같은것이 생기지 않았기 때문에 저 중에 무언가를 빼도 될것같기도 함.

==== gcc설치 ====
yum groupinstall 'Development Tools'

====selinux====
* see /etc/sysconfig/iptables (if you cannot access port 80 at remote place)
*# Modify that file or
*# Use the <code>system-config-firewall</code> command
*# if this is not a problem, see this [http://wiki.centos.org/HowTos/SELinux#head-ad837f60830442ae77a81aedd10c20305a811388 CentOS wiki page]
*#* <code> semanage port -a -t http_port_t -p tcp 81</code>
* Use <code>setenforce</code> command instead of <code> echo 0 > /selinux/enforce </code> (Because just simple. no other reasons)
* <code>ls -Z</code>
* <code>ps -ZC httpd</code>
** or <code>ps -eZ</code>

====unix time conversion ====
<code># date -d @1187769064</code>

====Base64 decode to file====
<code>perl -MMIME::Base64 -ne 'print decode_base64($_)' < file.txt > out</code>
 ([http://wvarner.blogspot.com/2008/06/base64-decode-to-file.html FROM])

Linux

2011-11-30T05:46:06Z

111.91.137.50:

Linux

2011-11-30T05:45:45Z

111.91.137.50:

Emacs

2011-09-07T05:24:47Z

111.91.137.50:

*my [[Dot emacs]]
*[http://xahlee.org/emacs/keyboard_shortcuts.html How to Define Keyboard Shortcuts in Emacs]
*[http://lpn.rnbhq.org/tools/xemacs/emacs_ref.html emacs command list]
*[http://www.emacswiki.org/cgi-bin/wiki/ControlTABbufferCycling emacs wiki - ctrl+tab buffer cycling]
*[http://www.gnu.org/software/emacs/manual/html_node/emacs/index.html#Top GNU emacs manual]
**[http://www.gnu.org/software/emacs/manual/html_node/emacs/Dynamic-Abbrevs.html dynamic expansion]
*tab설정 : <code>'''(setq-default tab-width 4)'''</code>
**http://www.emacswiki.org/emacs/EmacsChannelFaq 이 설정찾은 링크. 굉장히 좋은듯. read-it-later
*[http://www.emacswiki.org/emacs/BookMarks bookmark] ★★★
*M-x shell 보다 M-x term이 훨씬 낫다. eshell이 가장 보편적.
*M-/ auto completion
*encoding 변경: C-x C-m f 인코딩명 [http://kldp.org/node/32987 출처]
*[http://www.cs.bu.edu/teaching/tool/emacs/programming/ using Emacs for programming] 간단한 디버거 사용법 포함
*[http://www.emacswiki.org/emacs/AutoIndentation auto indentation]
*[http://www.gnu.org/software/emacs/manual/html_node/emacs/Custom-C-Indent.html changing default C indentation style] '''C-x .''' / '''C-M-q''' / '''C-M-\''' / c-set-style / c-default-style
**[http://www.emacswiki.org/emacs/IndentingC indenting C] (emacs wiki)
*[http://www.math.uh.edu/~bgb/emacs_keys.html key combinations] cheat sheet
*[http://www.gnu.org/software/emacs/manual/html_node/emacs/Query-Replace.html#Query-Replace query-replace] about recursive editing
* C-x z runs the command repeat
Repeat most recently executed command. With prefix arg, apply new prefix arg to that command; otherwise, use the prefix arg that was used before (if any). This command is like the `.' command in the vi editor. 
If this command is invoked by a multi-character key sequence, it can then be repeated by repeating the final character of that sequence. This behavior can be modified by the global variable `repeat-on-final-keystroke'. 
* C-x `
Visit the locus of the next error message or match. (from http://www.gnu.org/software/libtool/manual/emacs/Compilation-Mode.html)
* [http://www.cs.utah.edu/dept/old/texinfo/emacs19/emacs_27.html compiling and testing programs]
* [http://web.psung.name/emacstips/essential.html Ten Essential Emacs Tips] very very valuable!!!
* C-x C-q toggle-read-only [http://www.gnu.org/s/emacs/manual/html_node/elisp/Read-Only-Buffers.html ref manual]
* 특정 문자를 개행문자로 바꾸려면 : C-q C-j 로 repl-s (from [http://jeremy.zawodny.com/blog/archives/008872.html here])
* [http://www.emacswiki.org/emacs/HideShow hide and show] like vim's folding. (cf. [http://www.emacswiki.org/emacs/FoldingMode folding mode])
* emacs 쓸 때 제일 불편한게 jump.
** c-u c-space 몇번 누르다보면 어지간하면 나온다
** c-x c-space 위에꺼랑 비슷한데 global하다. 다른 파일로도 뜀. 너무 산만하게 뛰는게 단점.
** c-x r space [a-z] : vim 에서 m[a-z]
** c-x r j [a-z] : 위에서 저장해놓은 곳으로 뛴다.
** 이동시 항상 c-u 가 관건이다. 4, 16, 64... 의 감이 중요하다.
* M-x comment-region
** C-x r t is more easier and maintainable.
* <code>M-: (set-display-table-slot standard-display-table 'wrap ?\ )</code>
** Notice that after the `\’ there is a whitespace character (actually the backslash is optional for the whitespace, but it is used here for clarity), but you can add whatever you want
** http://www.emacswiki.org/emacs/LineWrap

Emacs

2011-09-07T05:24:21Z

111.91.137.50:

*my [[Dot emacs]]
*[http://xahlee.org/emacs/keyboard_shortcuts.html How to Define Keyboard Shortcuts in Emacs]
*[http://lpn.rnbhq.org/tools/xemacs/emacs_ref.html emacs command list]
*[http://www.emacswiki.org/cgi-bin/wiki/ControlTABbufferCycling emacs wiki - ctrl+tab buffer cycling]
*[http://www.gnu.org/software/emacs/manual/html_node/emacs/index.html#Top GNU emacs manual]
**[http://www.gnu.org/software/emacs/manual/html_node/emacs/Dynamic-Abbrevs.html dynamic expansion]
*tab설정 : <code>'''(setq-default tab-width 4)'''</code>
**http://www.emacswiki.org/emacs/EmacsChannelFaq 이 설정찾은 링크. 굉장히 좋은듯. read-it-later
*[http://www.emacswiki.org/emacs/BookMarks bookmark] ★★★
*M-x shell 보다 M-x term이 훨씬 낫다. eshell이 가장 보편적.
*M-/ auto completion
*encoding 변경: C-x C-m f 인코딩명 [http://kldp.org/node/32987 출처]
*[http://www.cs.bu.edu/teaching/tool/emacs/programming/ using Emacs for programming] 간단한 디버거 사용법 포함
*[http://www.emacswiki.org/emacs/AutoIndentation auto indentation]
*[http://www.gnu.org/software/emacs/manual/html_node/emacs/Custom-C-Indent.html changing default C indentation style] '''C-x .''' / '''C-M-q''' / '''C-M-\''' / c-set-style / c-default-style
**[http://www.emacswiki.org/emacs/IndentingC indenting C] (emacs wiki)
*[http://www.math.uh.edu/~bgb/emacs_keys.html key combinations] cheat sheet
*[http://www.gnu.org/software/emacs/manual/html_node/emacs/Query-Replace.html#Query-Replace query-replace] about recursive editing
* C-x z runs the command repeat
Repeat most recently executed command. With prefix arg, apply new prefix arg to that command; otherwise, use the prefix arg that was used before (if any). This command is like the `.' command in the vi editor. 
If this command is invoked by a multi-character key sequence, it can then be repeated by repeating the final character of that sequence. This behavior can be modified by the global variable `repeat-on-final-keystroke'. 
* C-x `
Visit the locus of the next error message or match. (from http://www.gnu.org/software/libtool/manual/emacs/Compilation-Mode.html)
* [http://www.cs.utah.edu/dept/old/texinfo/emacs19/emacs_27.html compiling and testing programs]
* [http://web.psung.name/emacstips/essential.html Ten Essential Emacs Tips] very very valuable!!!
* C-x C-q toggle-read-only [http://www.gnu.org/s/emacs/manual/html_node/elisp/Read-Only-Buffers.html ref manual]
* 특정 문자를 개행문자로 바꾸려면 : C-q C-j 로 repl-s (from [http://jeremy.zawodny.com/blog/archives/008872.html here])
* [http://www.emacswiki.org/emacs/HideShow hide and show] like vim's folding. (cf. [http://www.emacswiki.org/emacs/FoldingMode folding mode])
* emacs 쓸 때 제일 불편한게 jump.
** c-u c-space 몇번 누르다보면 어지간하면 나온다
** c-x c-space 위에꺼랑 비슷한데 global하다. 다른 파일로도 뜀. 하도 산만하게 뛰어서 내머리로는 감당이 안되었음.
** c-x r space [a-z] : vim 에서 m[a-z]
** c-x r j [a-z] : 위에서 저장해놓은 곳으로 뛴다.
** 이동시 항상 c-u 가 관건이다. 4, 16, 64... 의 감이 중요하다.
* M-x comment-region
** C-x r t is more easier and maintainable.
* <code>M-: (set-display-table-slot standard-display-table 'wrap ?\ )</code>
** Notice that after the `\’ there is a whitespace character (actually the backslash is optional for the whitespace, but it is used here for clarity), but you can add whatever you want
** http://www.emacswiki.org/emacs/LineWrap

Solaris

2011-03-02T05:03:00Z

111.91.137.50:

[http://coffeenix.net/board_view.php?cata_code=83&bd_code=55&bpage= 웹서버를 위한 솔라리스 튜닝]

[http://serings.tistory.com/76 솔라리스에서 사용자관리]

<code>Roles can only be assumed by authorized users</code>

*[http://opensolaris.org/jive/thread.jspa?threadID=73600 링크]참조하여 아래와 같이 해결 <source lang="bash">-bash-3.2# usermod -R root username</source>
*root 기본암호는 ovsroot
*이런식으로 권한을 주기보다 su oracle하고 su 이렇게 elevation하는 것이 좋을듯.}

[http://download.oracle.com/docs/cd/E19963-01/821-1698/index.html Oracle Solaris 11 Express 시작] (곧 사라질거같음) 

win32에서 X11은 [http://sourceforge.net/projects/xming/ Xming]설치 + putty에서 체크.

윈도우글꼴은 그냥 가져다가 TrueType폴더에 넣으면 자동으로 보인다. 아무것도 할 필요가 없음.

=====gcc는 기본으로 설치가 되어있지 않으므로 설치함.=====

[[http://www.c0t0d0s0.org/archives/4120-Less-known-Solaris-Features-exporthome-home-autofs.html home directory issue]] /export/home vs. /home

=====ftp on/off=====
<source lang='bash'>
/usr/sbin/svcadm enable ftp
/usr/sbin/svcadm disable ftp
</source>

=====prompt=====
[https://wiki.archlinux.org/index.php/Color_Bash_Prompt 여기]참고
<source lang='bash'>
PS1='\e[1;30m${LOGNAME}@$(/usr/bin/hostname):$(
[[ "${LOGNAME}" == "root" ]] && printf "%s" "${PWD/${HOME}/~}# " ||
printf "%s" "${PWD/${HOME}/~}\$ ")\e[0m'
</source>

=====eclipse=====
http://archive.eclipse.org/eclipse/downloads/

Solaris

2011-03-02T03:12:23Z

111.91.137.50:

Solaris

2011-03-02T01:02:32Z

111.91.137.50:

Solaris

2011-03-02T01:02:06Z

111.91.137.50:

[http://coffeenix.net/board_view.php?cata_code=83&bd_code=55&bpage= 웹서버를 위한 솔라리스 튜닝]

[http://serings.tistory.com/76 솔라리스에서 사용자관리]

<code>Roles can only be assumed by authorized users</code>

*[http://opensolaris.org/jive/thread.jspa?threadID=73600 링크]참조하여 아래와 같이 해결 <source lang="bash">-bash-3.2# usermod -R root username</source>
*root 기본암호는 ovsroot
*이런식으로 권한을 주기보다 su oracle하고 su 이렇게 elevation하는 것이 좋을듯.}

[http://download.oracle.com/docs/cd/E19963-01/821-1698/index.html Oracle Solaris 11 Express 시작] (곧 사라질거같음) 

win32에서 X11은 [http://sourceforge.net/projects/xming/ Xming]설치 + putty에서 체크.

윈도우글꼴은 그냥 가져다가 TrueType폴더에 넣으면 자동으로 보인다. 아무것도 할 필요가 없음.

=====gcc는 기본으로 설치가 되어있지 않으므로 설치함.=====

[[http://www.c0t0d0s0.org/archives/4120-Less-known-Solaris-Features-exporthome-home-autofs.html home directory issue]] /export/home vs. /home

=====ftp on/off=====
<code>
/usr/sbin/svcadm enable ftp
/usr/sbin/svcadm disable ftp
</code>